If your child has crooked teeth or a misaligned jaw, it may be time to pay a visit to an orthodontist. An orthodontist specializes in perfecting smiles using orthodontic appliances, such as: Bands Brackets Wires Headgear Rubber bands Retainers WebMD takes a look at common forms of orthodontics and gives you the facts you need to make an informed decision about orthodontic treatment. Types of Braces and Other Appliances There are a number of dental appliances used today.
But braces are still the primary means for straightening teeth and correcting misaligned bites in children. Braces work by applying pressure to the teeth and jaws to move them into a desired position. Braces are not the shiny mouthful of metal of years past. Many more options are now available. Teeth used to be fully banded. But today, brackets are bonded directly to each tooth's surface. In some people they're placed behind the teeth, making them less noticeable.
Braces are made of materials such as: Stainless steel Ceramic Plastic Combination of materials This can give a clear or tooth-colored appearance to the braces. When appropriate, the wires can be made of materials such as nickel-titanium or copper-titanium. These materials may be longer lasting and require fewer adjustments than stainless steel wires. Clear, invisible "trays" are now available. These can straighten teeth without using traditional braces and wires.
Invisible trays may be an option for some people who require simple orthodontic work. This method uses custom-made, clear, removable trays that put pressure on the teeth, moving them gradually into their correct position. This treatment often costs more than traditional braces. Other appliances used in orthodontics include: TADs: Temporary anchorage devices (TADs) are mini-screws ranging from 6 to 12 millimeters in length and 1.
2 to 2 millimeters in diameter. When needed they may be temporarily fixed to bone in the mouth to provide a fixed point from which to apply force to move teeth. TADs allow for more predictable tooth control. They are becoming more common in orthodontic treatment. Rubber bands: Rubber bands are also called elastics. They are used when more force is needed to move the teeth and jaws into the desired position.
You can choose your favorite color. Many kids choose their school colors or decorate their mouth during holidays (for example, orange and black for Halloween). Continued Headgear: Some people can benefit from using headgear. The appliance is attached to the braces from the back of the head and can be removed. As with rubber bands, headgear are used when extra force is needed to move the teeth and jaws.
If a headgear is needed, it usually only has to be worn at night while sleeping or at home. Retainers: Retainers are used to keep teeth in place once braces are removed. It takes time for your teeth to settle into their new position. By wearing a retainer, you can prevent your teeth from shifting. Some retainers may be removable. Others are fixed -- bonded behind your teeth. Some retainers are made of clear plastic and metal wires.
Others are made of rubber. And like braces, retainers can make a statement if you choose. There are glow-in-the-dark retainers or retainers customized with a picture. Can a dentist provide orthodontic treatment instead of an orthodontist? Yes. Many dentists have training in orthodontics. However, if more extensive orthodontic work is needed, it may be best to see an orthodontist. An orthodontist has two to three years of advanced orthodontic education and training beyond dental school.
He or she specializes in straightening teeth, correcting misaligned bites, and jaw problems. When should my child see an orthodontist? Your dentist can tell you when to seek evaluation from an orthodontist. The American Association of Orthodontists and the American Dental Association recommend all kids be evaluated for orthodontics by age 7. By this age, the orthodontist can detect subtle problems with jaw growth and emerging teeth.
Most kids begin active treatment between ages 9 and 14. Orthodontists recommend you correct dental problems while your child is still growing. Once they stop growing, treatment may take longer and require more extensive work. What's the youngest a child can get braces? There is no set age when children require orthodontics. The treatment plan will depend on individual needs. For example, kids with cleft palates get orthodontic appliances before their first teeth erupt.
Other kids may benefit from starting treatment as early as age 6 or 7, even if they have not lost all of their baby teeth. The goal of early treatment is to prevent further problems from developing. It will create a better environment for the permanent teeth to erupt, or grow, into. Most kids who require early orthodontics will still need braces or additional work later to complete the tooth and jaw alignment process.
But the amount of work may be significantly less if orthodontic treatment was completed early. Continued Do braces hurt? "Hurt" may be too strong of a word. But your child may have some discomfort when braces are first put on, when they are adjusted, or when you start using a new appliance, such as rubber bands or a headgear. Any pain or discomfort can be relieved by taking ibuprofen (Advil) or acetaminophen (Tylenol).
Also, if the wire, brackets, or bands irritate your child's mouth, your orthodontist can provide special wax to cover the sharp areas on the braces. Is it possible to be allergic to braces? Yes. Some people are allergic to stainless steel. When this happens, other materials can be used instead. People can also be allergic to the latex gloves used by the orthodontist and the assistants. If your child has a latex allergy, tell your dentist so that non-latex gloves can be used.
Braces can sometimes irritate a child's gums, causing this to swell. This is not an allergic reaction, but something parents still need to watch for. What foods are off-limits for kids who wear braces? Braces are delicate. Breaking part of the appliance can result in the teeth moving in the wrong direction and in longer treatment. Anything that is hard, sticky, or chewy should not be eaten, including: Ice Nuts Popcorn Hard candy Chewing gum Chewy candy, like caramel Gummies How long does my child need to wear braces? The length of treatment varies.
It depends on the problem, how well your child cooperates, and your child's growth. Typically, most people wear braces from 18 to 36 months. How long does my child need to wear a retainer? Ideally, your child should wear a retainer forever, even if it is only one night a week. Of course, this may not be practical. The teeth are like the rest of the body and the body changes. Once your child stops wearing the retainer, slight changes to the teeth should be expected.
On average, how much do braces cost? The cost varies depending on the extent of work being done, the type of braces being used, and where you live. But you should expect to pay between $2,000 and $8,000. Continued Most orthodontists provide different payment plans and will allow you to make payments over the course of treatment without charging interest. Some may take insurance. Ask your orthodontist about all treatment fees and payment plans they offer before treatment begins.
If your child could benefit from braces but you can't afford it, there may be other ways to cover the cost, including: Financial aid programs: Low-income families can apply to the Smiles Change Lives program. This provides access to orthodontic treatment for children between the ages of 11 and 18 years of age. If accepted, the child can receive braces for $250 to $500. To be accepted, you must meet certain income requirements (for example, a family of four cannot earn more than $40,000 per year) and your teeth must be moderately to severely crooked.
Medicaid: Medicaid may cover braces, especially if your child's teeth cause problems with talking, eating, or swallowing. This coverage varies from state to state. Dental schools: If you live close to a dental school with an orthodontics program, you may be able to get treatment from a student (supervised by an experienced orthodontist) for a lower cost. Dentists: Some general dentists provide orthodontic treatment and may be able to take care of your orthodontic needs at a reduced rate since they are not orthodontists.
Making the decision to embark on orthodontic treatment may not be easy, but an improved smile can make a huge difference in appearance and self-esteem. There are many options available. When choosing a treatment plan, you need to consider many factors, including the orthodontic needs, cost, and primary goals of treatment. Your dentist or orthodontist can help you make the right decision for you and your child.
Sources SOURCES: American Dental Association web site: "Braces and Orthodontics." American Association of Orthodontists web site: "Myths and Facts;" "All About Orthodontics;" "Elastics;" "Keeping Your Smile Beautiful After Orthodontic Treatment;" "Getting into Gear: Orthodontic Headgear;" "Temporary Anchorage Devices (TADs) for Predictable Tooth Movement;" "Two-Phase Orthodontic Treatment;" and "When to See an Orthodontist.
" Nemours Foundation web site: "Why do people need braces?" and "Affording Braces." Aetna web site: "Orthodontics Braces and More." American Academy of Cosmetic Dentistry web site: "Orthodontics and Clear Aligners." Leon Aronson, DDS, MS, adjunct professor of orthodontics, Medical College of Georgia; Center for Advanced Dental Education, Saint Louis University; vice president, International College of Dentists.
© 2016 WebMD, LLC. All rights reserved.See Also: First Tee 9 Core Values
An equipment is probably the major investments you can at any time make. Appliances are usually significant buys, and therefore are one particular with the most significant areas of your property. You depend on appliances for everything from cooking to cleaning, and particularly considering the quantity of income you'll be putting forth for it, it only makes sense that you would wish to you should definitely make the most smart buy.
House appliances is usually a term that is utilised really commonly today but what does it stand for? Residence appliances stand for your mechanical and electrical products that are used in your own home for your functioning of a standard family.
Transpalatal Bar/Nance/Lingual ArchThe Transpalatal Bar/ Nance / Lingual Arch appliances are used in the upper and lower arches to maintain space. Primarily they are placed in patients who are in transitional dentition (not all adult teeth have erupted), to hold space in the arch for the permanent teeth to erupt. In cases where it is appropriate to use this appliance, it will be part of the beginning phase of orthodontic treatment.
The Transpalatal Bar/Nance is a metal bar attached to the tongue-side of the upper first molar bands, and form fitted along the roof of the mouth, that may or may not have acrylic. The Transpalatal Bar helps to maintain the width of the dental arch. We commonly use this appliance for patients who have an impacted permanent tooth, and exposure of that tooth is suggested. The Lingual Arch is a metal bar that is attached to the tongue-side of the lower first molar bands, and form fitted behind the teeth.
This appliance is recommended when baby teeth are lost prematurely, so that space may be maintained. Bionator The Bionator is a removable appliance used to help correct an “overbite” by promoting lower jaw growth. In cases where it is appropriate to use this appliance, it will be part of the beginning phase of orthodontic treatment. Since a Bionator is primarily an orthopedic appliance, which influences the growth of bone, the appliance should be used during a period of maximum growth.
Generally, the younger the patient's age when it is used, the more change observed over a period of growth. If the patient doesn't grow during use of the Bionator, only changes in tooth position will be seen. When a patient reaches the stage we call skeletal maturity, this appliance is no longer effective at influencing jaw growth. Key Points The Bionator should be worn all the time except when eating or brushing; consistent use is the key.
The lower jaw should be brought forward into a “seated” position. Brush your Bionator at least once per day. Biteplane The Biteplane is an appliances used to reduce a deep overbite, whereby the upper front teeth overlap the lower front teeth excessively. It works by preventing the patient from biting down all the way on his/her back teeth; this allows the back teeth to naturally erupt, thus reducing the overlap of the front teeth.
The Biteplane is an appliance made of wire and acrylic, which can be removable or cemented in place by the orthodontist. The removable Biteplane is most effective when worn all the time. The quality of our end result and completing treatment on time is dependent upon the patient wearing the Biteplane consistently. Key Points Wear the Biteplane all the time except when brushing or eating. Use caution when eating; some teeth may be hitting edge to edge.
Be sure to keep the biteplane clean by brushing it at least once per day. Bitesplint A Bitesplint is a custom fit rubber mouthpiece worn on the lower teeth. A Bitesplint is primarily used to help in the correction of a crossbite (upper teeth inside of lower teeth) and is worn along with upper braces. This appliance prevents the patient from completely biting, allowing for the tooth or teeth in crossbite to be moved into the correct position.
Key Points Wear the Bitesplint all the time, except when eating or brushing your teeth. Be very careful when eating. Your teeth may be hitting edge to edge and prone to chipping. Brush your Bitesplint at least once per day. Don't drink soda or eat candy while the Bitesplint is in place. Fan Type Expander The Fan-type Expander widens the front of the upper arch without widening the back. As shown in the illustration, the Fan-type Expander is comprised of metal bands that are placed on the six year molars which are attached via metal bars to the main body of the appliance.
The main body of the appliance is joined at the center by an expansion screw. Since an expander is primarily an orthopedic appliance (influences the growth of bone) the younger the patient's age when it is used, the more rapid and more stable the correction. Key Points Activate the expander by turning the expansion screw with a “key.” Expansion is normally complete within 2-3 weeks. The expander must stay in place for about 6 months to prevent the teeth from collapsing back to their original positions.
Fixed Lingual Retainer Fixed Lingual Retainers are wires bonded behind the upper and/or lower front teeth, on the day the braces are removed. The lower wire is bonded in place to stabilize the lower front teeth during the retention phase of treatment. This wire remains in the mouth for at least 2 years, but ideally should remain as long as the patient is able to keep the back side of the lower front teeth clean.
When a Fixed Retainer is used in the upper arch, it is usually behind the two upper front teeth. This is typically used for patients who had a large space between the front teeth before orthodontic treatment. The Upper Fixed Lingual Retainer should remain in place for as long as possible, or until your general dentist recommends it be removed. Forsus Springs Forsus Springs are used in cases where the upper teeth are forward of the proper fit with the lower teeth.
They have almost the same effect as rubber bands and are primarily used when patients have proven to be uncooperative with rubber band and/or Headgear wear. They are NOT a substitute for headgear though. If headgear wear is poor, then FORSUS springs may offer an acceptable compromise. FORSUS springs are used as a second resort because rubber bands are usually more comfortable to wear and allow for easier brushing.
Forsus Springs are used in conjunction with upper and lower braces and are placed by the orthodontist. They are held in place by tubes on the upper molars and attached to the lower archwire. The springs work EXTREMELY well because they are not removable and insure a constant force on the teeth. Key Points Forsus springs will cause some discomfort the first few days. They are usually worn for 3-4 months.
Brush carefully around the springs to keep everything clean. Be especially cautious with your diet to avoid bending or breaking the springs. Braces Braces are the mechanism we use to “get a handle on the teeth.” In other words, they merely provide an attachment with which we can grab and move the teeth. Traditionally, Full Braces involve bands that are placed on the molar teeth (which wrap entirely around the tooth) and brackets bonded to all other teeth.
A special type of glue is used to bond the brackets to the teeth. It is just strong enough to keep the braces on during treatment, but must be weak enough so that the braces can be removed when treatment is complete. Oral hygiene, including tooth brushing and flossing, is EXTREMELY important during orthodontic care. Braces attached to the teeth provide many more places for food particles and plaque to accumulate.
This debris is easy to remove with thorough and proper brushing and flossing. Without proper hygiene, the patient is at risk for developing decalcification (white marks) on the teeth, cavities, and puffy, overgrown gum tissue. The photo above illustrates one type of braces we offer. Different colored “ties,” which hold the archwire to the bracket, may be chosen at each appointment. For mature teens and adults, we also offer ceramic brackets.
These brackets are less noticeable because they are the same color as your tooth. Remember though that the archwires going through the brackets will still be visible. Headgear This appliance is used when there is a difference in growth between the upper and lower jaws, such that the upper teeth and jaw are too far forward of the lower teeth and jaw. This condition is often responsible for the appearance of protruded upper front teeth or “buck teeth” and can also cause an excessive vertical overlap of the front teeth or “deep bite.
” This appliance may also be used to prevent the upper back teeth from slipping forward during space closure in patients who have had extractions for bite correction. The Headgear uses the back of the neck (see photo) as an “anchor” to correct this relationship. The inner part of the headgear slides into tubes on the side of the first molar teeth. Key Points Wear the headgear at least 14 hours per day.
In other words, after school, after dinner, and all night as you sleep. The more consistently you wear your Headgear, the less total time you will ultimately need to wear it. Patients who wear their Headgear appropriately can usually be finished with Headgear within a year. Be gentle when removing and inserting the Headgear. Should a molar band become loose, please call as soon as possible to have it repaired.
Please remember to bring your Headgear to our office on every visit for any needed adjustments. Lower Spring Retainer In cases where there is plaque and calculus build up and/or there is a hygiene problem with swollen gums, it may be recommended that a Lower Spring Retainer be used. We also use this retainer when there has been a small amount of relapse in tooth movement. This is a small removable wire and acrylic retainer that fits over the lower front teeth.
The Lower Spring retainer may be used to simply hold the alignment of the teeth or to correct slight rotations or crookedness. Palatal Expander In the field of orthodontics there is no appliance more effective at expanding the maxillary (upper) arch. A palatal Expander is our first choice for patients requiring an increase in the width of the upper dental arch. This not only corrects crossbites, but it creates needed space when there is crowding.
Palate Expanders use two or four teeth to anchor themselves in place, and by turning a small screw (shown in the center) we are able to achieve expansion of the upper jaw by as much as 3/4 of an inch! The goal of the appliance is not just to move the teeth apart, but also to move the bones of the palate apart. Since a Palate Expander is primarily an orthopedic appliance (influencing the growth of bone) the younger the patient's age when it is used, the more rapid and more stable the correction.
When a patient reaches the stage we call skeletal maturity, (approximately age 16 for girls and for boys occurs around the age of 18) the two bones that comprise the upper jaw fuse and expansion through orthopedics is extremely difficult without surgical assistance. Key Points Expansion is usually completed within 2-3 weeks. The expander must stay in place for about 6 months. This allows time for the bone to heal in.
If the expander is removed too soon, the bones and teeth will collapse back in. It is completely normal, and even desirable, for a space to form between the two upper front teeth during expansion. It is a sign that the two bones that make up the palate have been effectively separated. Keep you expander clean with careful brushing. Pendulum/Pendex The Pendulum/Pendex appliance is used primarily in cases where the upper molars are too far forward and need to be moved backward.
The objective is to make the upper teeth fit correctly with the lower teeth. As shown in the illustration, the Pendulum/Pendex appliance is comprised of bands placed on the first molars, which are in turn attached via a coiled wire to the main body of the appliance. The main body of the appliance is made of plastic, which may have an expansion screw. The body of the appliance is anchored in place by bonding on the chewing surface of the teeth in front of the molars.
If the appliance has an expansion screw, the activation of the screw allows the molars to be moved outward while the coiled wire moves them backward. Key Points Normally remains in place for 3-6 months. This appliance will typically be part of the beginning phase of treatment. Take care to keep all parts of the appliance clean with gentle brushing. Reverse Pull Headgear A Reverse Pull Headgear is used to correct skeletal Class III malocclusions, which means the upper jaw is less prominent than the lower jaw.
In other words the upper jaw is behind, or the lower jaw is forward. A dental “underbite” commonly accompanies this jaw relationship. This means the lower front teeth are in front of the upper front teeth. The goal of the Reverse Pull Headgear is to encourage forward growth of the upper jaw, thus correcting the underbite and improving the facial appearance. It is most common to use this appliance at a very young age, in fact, the younger the better! In some cases, which would eventually require jaw surgery, surgery can be avoided by proper and consistent use of the headgear.
Key Points Success with Reverse Pull Headgear depends on your cooperation. It's important to wear the Headgear at least 14 hours a day. Wear the Headgear after school, after dinner, and all night long. The more consistently you wear your Headgear, the less total time you will ultimately need to wear it. Please remember to bring your Reverse Pull Headgear to the office on every visit for any adjustments that may be needed.
Should you run out of rubber bands or have a molar band become loose, please call us as soon as possible. Rubber Bands Rubber bands are the primary mechanism we use to move teeth so that they fit together correctly top to bottom. They can be worn in any number of configurations. Rubber bands are attached using hooks that are part of the brackets or the bands. Always remember that braces merely give us a way to "grab onto" the teeth.
It is the rubber bands and wires that move the teeth. The rubber band phase of treatment is the one that takes the longest in the average patient. Please keep in mind, the rubber bands only move teeth; however, if you have any discomfort in your jaw joint, please let us know. The quality of our end result and completing treatment on time is dependent upon the patient following instructions for wearing rubber bands precisely.
In most instants, this means all the time. For those who seek maximum esthetics we have tooth-colored rubber bands. For those who want to make a fashion statement, we have fun colors. Separators Separators are small rubber or metal rings that are placed between the contacts of the teeth. Their purpose is to create space between the teeth to allow for the placement of bands on the molar teeth. The separators are placed 5-10 days prior to the start appointment.
Initially, they may cause some minor discomfort. Patients sometimes say it feels like a piece of meat stuck between their teeth. During this period, we ask the patient to avoid sticky or chewy foods to prevent them from becoming dislodged. You will need to check them periodically, and if they fall out, please contact our office to determine if they will need to be replaced. Tongue Spurs Tongue Spurs are used in cases where a patient has a strong tongue thrust habit or thumb sucking habit, causing an open bite (upper front teeth do not meet the lower front teeth when biting).
The Tongue Spurs will help assist the patient in retraining his or her tongue when swallowing or preventing the patient from comfortably sucking their thumb. Tongue Spurs are small metal hook-like wires placed behind the lower front teeth. They can be glued individually on the lower front teeth as shown, or they can be attached to a wire that is connected to the first molars. The spurs will remain in the mouth until the patient has successfully retrained his or her tongue and stopped the harmful habit.
Continuation of tongue thrusting or other finger habits are a major cause of treatment delays, failure, and retention relapse. Turbo Brackets Turbo Brackets are appliances used to reduce a deep overbite, whereby the upper front teeth overlap the lower front teeth excessively. These appliances work by preventing the patient from biting down all the way on his/her back teeth; this allows the back teeth to naturally erupt, thus reducing the overlap of the front teeth.
The Turbo Brackets are small metal brackets cemented behind the two upper front teeth. They are extremely effective because they cannot be removed. However, they may cause difficulty when eating at first. We recommend eating soft foods during this transition, and expect the back teeth to come together over the course of a few months. Key Points Let us know if you play football or wrestle; the turbos should not be in place during heavy contact sports.
Rest assured that your back teeth will touch again. Try not to grind or gnaw on your turbo brackets. Upper Retainers (Removable) The Slip Cover or ESSIX Retainer (clear plastic) is the first initial retainer that most patients receive on the day the braces are removed. The Slip Cover Retainer is to be worn at all times until the patient receives a Hawley Retainer. These retainers effectively maintain the alignment of teeth, while simultaneously allowing for controlled, minute movement of teeth which orthodontists call "settling.
" When worn as instructed, the bite actually improves in the critical first few weeks after the braces are removed. Retainers are truly as important as braces in the long-term result of orthodontic treatment. And YES, retention is a lifelong commitment. Shifting and crowding of the teeth have been shown to be part of the normal aging process. Your retainers allow you to keep your youthful smile long after nature intended.
Remember though that your teeth will be their straightest the day your braces are taken off. It is normal to have some slight changes in alignment even with flawless retainer wear. To keep these changes to an absolute minimum, wear your retainer(s) as instructed. Please follow our use, care, and maintenance instructions carefully. We will advise you of any special instructions for your particular case.
Utility Arch Before braces can be placed on all of the teeth, we often need to create space and correct the overbite (excessive vertical overlap of front teeth). One way to accomplish this is by placing Upper and/or Lower Utility arches. These are wires that run directly from the molars to the font teeth, bypassing the premolars. Sometimes we start treatment by bonding just the first molars and the front four teeth and use utility arches to begin aligning the teeth and correcting the overbite.
Other times we use the utility arches in conjunction with full braces (as pictured below).